RF-JAM TAC
Operational in Under 3 Minutes.
A battery-powered, backpack-portable cellular and Wi-Fi denial system for mobile and rapid-response operations. Six SDR bands deliver up to 20 W each across 2G–5G NSA, in a MIL-STD-810H ruggedized case that deploys in under 3 minutes and runs ≥ 4 hours on internal batteries.
Denial That Moves With the Team
Fixed installations cannot follow a dynamic perimeter. RF-JAM TAC packs SDR band modules, batteries and antennas into a single ruggedized case so an operator can establish a denial bubble anywhere — a convoy halt, a cordon, a temporary secure area — and strike it just as fast.
Rapid Deployment
Case-to-operational in < 3 minutes with tool-free antenna deployment and a single-switch power-up sequence. Simplified field-optimized controls, no laptop required for basic operation.
Six SDR Bands, 20 W Each
Covers 700, 850–900, 1800, 1900–2100, 2600 MHz cellular plus Wi-Fi 2.4 GHz at up to 20 W (+43 dBm) per band, 2G / 3G / 4G / 5G NSA, with per-band on/off and 3-level power.
All-Environment Autonomy
MIL-STD-810H, IP67 case, −30 °C to +60 °C. Internal hot-swap battery gives ≥ 4 h continuous denial; runs on 12–28 V DC vehicular or 110/220 VAC when available.
Directional or Omni
Ships with an omni whip for 360° bubbles and an optional directional panel (8–12 dBi) to project denial along an axis while sparing the operator's own position.
The Result
- < 3 min from transport case to active denial
- Six bands · up to 20 W (+43 dBm) each · 2G–5G NSA + Wi-Fi 2.4 GHz
- ≥ 4 h battery autonomy · hot-swap pack · vehicular 12–28 V DC
- MIL-STD-810H / IP67 · −30 °C to +60 °C · < 14 kg with batteries
Technical Specifications
Bands & RF Power
| SI-RJT-B07 | 758–803 MHz · LTE B28 · 20 W (+43 dBm) |
| SI-RJT-B09 | 850–960 MHz · GSM/LTE B5/B8 · 20 W (+43 dBm) |
| SI-RJT-B18 | 1805–1880 MHz · DCS/LTE B3 · 20 W (+43 dBm) |
| SI-RJT-B21 | 1920–2170 MHz · UMTS/LTE B1/B2 · 20 W (+43 dBm) |
| SI-RJT-B26 | 2620–2690 MHz · LTE B7 · 20 W (+43 dBm) |
| SI-RJT-W24 | 2400–2484 MHz · Wi-Fi 2.4 GHz · 15 W (+41.8 dBm) |
Ordering Information
Part numbers and configuration options
| Part Number | Description | Availability |
|---|---|---|
| SI-RJT-BP6 | 6-band man-portable tactical jammer | Standard |
| SI-RJT-BAT | Spare hot-swap Li-ion battery pack | Standard |
| SI-RJT-ANT-D | Directional panel antenna · 8–12 dBi | Optional |
| SI-RJT-VMK | Vehicular mount + 12–28 V DC harness | Optional |
| SI-RJT-RMT | Encrypted remote-control link | Optional |
| SI-RJT-CHG | Dual-bay battery fast charger | Optional |
Implementation Process
Site Survey
- Rapid RF sweep of the operating area
- Terrain and line-of-sight assessment
- Target-band selection
System Design
- Antenna choice (omni vs directional)
- Power-level plan
- Battery/vehicular power plan
Installation
- Tool-free case setup
- Antenna deployment
- Power connection
Calibration
- Per-band power set
- Effective-radius check
- BITE self-test
Training
- Operator quick-start
- Battery hot-swap
- Safe RF handling
Go-Live
- Activate denial bubble
- Monitor status display
- Strike and relocate
Typical deployment timeline: 4-8 weeks depending on facility size and complexity
Frequently Asked Questions
Carry Denial Wherever the Mission Goes
Request a demonstration of a full denial bubble established in under 3 minutes.
RF-JAM ZERO HP
When the perimeter becomes permanent, step up to fixed 100 W-per-band cabinets.